The Best Dog Nail Dremels To Trim Your Dog’s Nails With
Dogs have pretty long nails, and these nails can be a real pain to deal with once they get too long. Not only are they naturally sharp, which can cause injury to your or damage your furniture, but it can also lead to some problems for the dog itself if the nails get especially long. That’s why you’ll need to use the best dog nail dremels and grinders to keep them in shape.
Dog nail grinders are neat little devices that use rotary power to grind down your dog’s nails to shape. This isn’t painful at all, and as long as your dog stays still while getting its nails done, it’s easy to use and completely safe. Unlike traditional methods of cutting a dog’s nails, these tools can help immensely by saving time and effort.
Dog nail grinding tools have different functionalities, and some are better suited for certain pet owners than others. Below is a list of the best dog nail drill grinders that we could find - read on to find one that you think works best for you.
Best Dog Nail Dremel Buyer’s Guide
Dog nail dremels and grinders are some of the easiest ways to trim your dog’s nails, but they can also be dangerous if not used properly. Here’s what you should know about these tools before using them.
What Is a Dog Nail Dremel?
A dog nail dremel or grinder is a tool used to grind down a dog’s nails. Instead of trimming them, you use the grinder to keep them at a reasonable length. If done properly, this also prevents your dog from getting injured in the process.
Why Should You Use Dog Nail Dremels?
It’s easier to cut nails
Dog nails are different from your typical set of human nails. While human nails are thin and short, dog nails can grow to surprising lengths and are thick enough to handle constant contact with the ground. These nails are designed to maim and attack in the wild, after all, and even if dogs have been domesticated and are less fierce as they once were, their nails are still something that you should be careful around.
Now, when it comes to cutting nails, you can actually cut them off while your dog is young using a pair of human clippers. At this stage, the dog is still young enough that the nails haven’t completely hardened just yet. Once it grows up, however, the nails will be very, very difficult to cut with even the sturdiest of human clippers, and you’ll need a pair of specialized dog nail clippers to get the job done.
Even with dog nail clippers, it can be a bit of a hassle. Dog nail grinders, on the other hand, are far more convenient. You won’t need to apply manual force while clipping down, and you won’t accidentally cause injury as you’ll have more control with the grinder compared to the clipper.
It’s safer to use on certain dogs
Dogs’ nails have a “living” portion to them, so to speak. It’s known as the quick, and it supplies blood to the nail. It’s essentially like a blood vessel for dogs, and exposing it can be dangerous as it can cause pain and lead to blood loss. While the quick is easily spotted on some dogs, dogs with dark nails will have their quick hidden, and it can be very dangerous to use a pair of clippers on them without knowing exactly where the quick is.
Dog grinders give you a level of control that dog clippers don’t have, and while they’re slower, this also means that you can more safely grind down the nails without exposing the nails quickly. This will prevent any possible injury, and your dog will be thankful for not hurting.
Tips When Using a Dog Nail Dremel of Grinder
Dog nail grinders may be relatively safe, but you’ll need to know a few things before using them on your dog for the first time.
Charge them sufficiently before use
Be sure to give your dog nail grinder a good charge before using it. While this may sound like an obvious decision, you’d be surprised by how many people forget to charge battery-powered tools right before using them, including dog nail grinders. This is likely due to the fact that many tools these days already arrive partly charged, and this tricks the user into thinking that it’s got enough power to use from the get-go without charging.
Of course, this is not always the case. While you may sometimes be able to use it for an entire session without charging, you’ll more likely end up with a dead dog nail grinder halfway through the grinding session. This will leave your dog with incomplete nails and you’ll have to wait before you use the dremel or grinder again. Prevent this from ever happening by simply charging a couple of hours before grinding your dog’s nails. It won’t take more than a minute to set up and you’ll be thankful you did it later.
Use the right speed for the right set of nails
Depending on the thickness of the nails and the size of the dog, you may want to use a low speed for precision and comfort, or a high speed for speed and efficiency. Dogs with thick nails can be ground at high speeds without issue as long as you don’t reach the thick. Just be sure you know where to stop and you’ll be grinding your dog’s nails fairly easily and safely.
Dog Nail Dremel Price Range
Dog nail dremels and drills cost around $20 to $50. For reference, Dremel sells their nail dog grinder for around $28 on their Amazon store page at the moment. You don’t really have to spend more than $50 on a nail grinder, especially if Dremel sells theirs for far less.
Best Dog Nail Dremels in Detail
oneisall Dog Nail Grinde
– Low Noise
Dogs are pretty sensitive to noise. Case in point – have you ever seen your dog during New Year’s? The loud noises of the fireworks may seem fun and exciting to us, but for dogs, it’s basically a living nightmare. Dogs have very large ears, much larger than ours when compared to the head, and these ears can pick up a wide range of sounds. This can make even the process of grinding nails down an issue if your dog is particularly sensitive to noises.
At 50db, the noise of the nail grinder is low enough that your dog won’t be afraid when it hears the noise. The quiet nature of the tool is thanks to its design, as well as the two-speed feature available. If your dog is very sensitive to noise, then you’ll want to go for the slower speed, whereas you can also make use of the higher speed if your dog’s fine with such noises.
- Low noise
- Great for keeping dogs calm
- A little slow
Razoo Dog Nail Grinder
– With LCD Display
This dog nail grinder is great if you want to know exactly how fast your nail grinder is operating. It’s got an LCD display which gives you critical information as you use the tool. It’s also fully rechargeable, and with it being able to run for up to 10 hours before needing a recharge, it’s safe to say that you probably won’t need to charge it all that often. In just 1.5 hours of charging, the device will be able to last up to 5 hours, which is more than enough for one session of nail grinding.
The device can be charged in the car, through your laptop and phone, and of course, through a power outlet. Finally, the grinder is very quiet and has two-speed options to choose from. You can precisely trim your dog’s nails by using the right speed at the appropriate time. If you’re looking for a nail dremel that can be charged anywhere there’s power, then this is the grinder for you.
- LCD display for easy use
- Can run for up to 10 hours
- Requires at least 2 hours of charging to get to full charge
Peteast Dog Nail Grinder
– With LED Light
While the previous nail grinder had a light display, this grinder has a directional light installed right in front of the device. It’s designed to point at the nail, allowing you to clearly see where the dog’s blood vessel is. You won’t end up grinding the nails too much and causing injury thanks to this. Many inexperienced dog owners end up grinding the nails too much, and this can cause serious pain for the dog, so having a heads-up can really help prevent a potential injury.
The nail grinder uses a powerful motor that can run up to 8500 rpm. This is especially useful for larger dogs, as they’re known for their especially thick nails. The device is USB rechargeable, meaning that it can draw power from anywhere with a USB connection, be it a phone, laptop, or power bank. You can also change the size of the grinding port to make sure you use the right one for the job.
- Directional light to see where you’re grinding
- Runs at up to 8500 rpm
- Can be too strong for some dogs
Casfuy Dog Nail Grinder
– With Protective Sleeve
This grinder is interesting in how it’s used depending on what type of dog you’re using it on. The device has two speed modes, like with other nail grinders, but it also has a protective sleeve that you put on if you’re grinding the nails of small to medium-sized pets. You use different parts of the protective sleeve depending on how large the dog is. For large dogs, you remove the protective sleeve completely to bring out the full speed and potential of the nail grinder.
Because of its unique way of grinding nails, this grinder can be effective to use if you have all sorts of dogs at home, or if you’re running a pet salon. The grinder can handle any sort of dog nail, no matter how large or small, and this versatility may play to your advantage. Just remember when to use the sleeve and which mode to use, and you’re good to go.
- Protective sleeve for smaller dogs
- Great for use on all sorts of pets
- Requires a little more skill than your average grinder
Finally, let’s take a look at the original dog grinding tool – Dremel’s 7300-PT. Dremel’s been around for a while, and they’re known for their many rotary tools. Their dog nail grinder is no exception, and it’s got everything you need to safely and humanely grind down a dog’s nails with no fuss or issue whatsoever. It’s made out of a dense plastic material ensuring that it’s durable and long-lasting.
Aside from its make, the device also has two rotation speeds to choose from, and its sanding drum is fast, but comfortable, meaning that while it can grind down nails effectively, it does so without risking injury to your pet. You can also change the bit used in the nail grinder if the old one’s starting to wear out. Dremel’s the premium brand when it comes to dog nail grinders, and if you have the money, you should definitely consider investing in one.
- High-quality build
- Safe and ethical design
- Not the cheapest grinder around
People Also Asked
A: Yes, they are, and as long as you know where and when to stop grinding, it’s completely fine to use on any dog.
A: The sound, vibration, and heat of certain dog nail grinders can scare some dogs, so be sure to always look at your dog’s condition as you use the grinder.
A: A monthly trim is good to do as it prevents the quick from growing too long.